SkyReal Documentation

  1. Accueil
  2. Docs
  3. SkyReal Documentation
  4. Devices Configuration
  5. HMD – Mixed Reality

HMD – Mixed Reality


For using Microsoft Mixed Reality with SkyReal you will need:

  • The Mixed Reality device
  • Up to date windows 10 version
  • The Steam Software (Link)
  • The Steam VR plugin (Link)
  • The Windows Mixed Reality for SteamVR plugin (Link)

Configuration Mixed reality

Optional steps if nothing appears when the Headset is plugged
  1. Run the “Device manager” in windows
  2. Install the driver of the HoloLens Sensors
Mandatory steps
  1. A Mixed reality configuration page should be displayed
  2. Click on “Begin”
  3. Click on “Accept”
  4. If your computer is compatible, click on “Next”
  5. Click on “Next”
  6. Click on “Next”
  7. Click on “Yes”, then push the match button on both of the controllers
  8. Pick the configuration you want’s, and follow the instructions

Configuration Steam VR

1. Run Steam VR.

2. Click on the “Run room config element”.

3. Select “Room setup”.

4. Follow the instruction. Then, click on “Next”.

5. Connect all your devices and place it in front of the camera. Then, click on “Next”.

6. Point the controller on the screen (important step, it will define where is the front of your room). Then, click on “Next”.

7. Put your controllers on the ground. Make sure that both of your controller are seen by the camera (important step, it will define where is the ground of your room). Then, click on “Next”.

8. Read the instruction to create the VR safe zone. Then, click on “Next”.

9. Hold on the trigger, then define the work area.

10. When it’s finished, click on “next”.

11. Your configuration of the Vive is now over. You can start SkyReal in VR mode.

Cet article vous a-t-il été utile ? Oui Non

Comment pouvons-nous aider ?